Can of neoprene glue 5 L - Essential by My Podologie

Multipurpose contact adhesive based on polychloroprene rubber in flammable solvents, light in color and with high initial tack.

This glue has a very long open time as well as great ease of application.

It is used exclusively as a single component without the addition of Catalyst and essentially in 2-sided gluing.

Not suitable for plasticized PVC (migration), nor expanded or extruded polystyrene (solvent attack). Product used in shoemaking, upholstery, furnishing, layout, construction as well as many industrial areas.

TECHNICAL CHARACTERISTICS

CHEMICAL BASIS	Glue based on polychloroprene rubber + resins dissolved in flammable organic solvents.
COLOR	Yellowish
CONSISTENCY	Liquid easily applied with a brush
DENSITY (g/cm3)	~ 0.82 g/cm3
DRY MATTER CONTENT	~24.1%
VISCOSITY	~ 1900 mPa.s
CHARACTERISTICS OF POLYMERIZED GLUE FILM	Fairly firm and flexible glue film. Excellent adhesive properties on many materials. Good thermal resistance up to +80°C peak (specific tests required depending on the materials and intended use). Single-component glue to be used without adding isocyanate catalyst
CONSUMPTION / DEPOSIT	~ 120 to 140 g/m² wet per side, variable depending on the nature of the materials to be bonded and the application system
SETTING SPEED	Very good tack and initial setting upon display / Final setting 24 hours
OPEN TIME	? 4 hours (2-sided gluing)
OPERATING TEMPERATURE	? +15°C and ? +30°C

Description

Can of neoprene glue 5 L - Essential by My Podologie

CHEMICAL BASIS	Glue based on polychloroprene rubber + resins dissolved in flammable organic solvents.
COLOR	Yellowish
CONSISTENCY	Liquid easily applied with a brush
DENSITY (g/cm3)	~ 0.82 g/cm3
DRY MATTER CONTENT	~24.1%
VISCOSITY	~ 1900 mPa.s
CHARACTERISTICS OF POLYMERIZED GLUE FILM	Fairly firm and flexible glue film. Excellent adhesive properties on many materials. Good thermal resistance up to +80°C peak (specific tests required depending on the materials and intended use). Single-component glue to be used without adding isocyanate catalyst
CONSUMPTION / DEPOSIT	~ 120 to 140 g/m² wet per side, variable depending on the nature of the materials to be bonded and the application system
SETTING SPEED	Very good tack and initial setting upon display / Final setting 24 hours
OPEN TIME	? 4 hours (2-sided gluing)
OPERATING TEMPERATURE	? +15°C and ? +30°C